Do you know where your septic tank is? Okay, so you can point to an area on the property and say “yeah, it’s over there” having a hint of un-sureness. Another question is most likely more essential then the one just asked. Do you know where the cover to your septic tank is? Does that have you scratching your head?
Septic tanks by their very nature are buried, sometimes 3 feet or deeper underground. Out of sight from mind as they say. But that’s not always a very important thing. There will be a period when your septic system actually starts to exhibit problems and requires some maintenance/repairs as well as the tank needs to be pumped out. Possessing a general idea regarding the location of the tank can make getting this easy task done far more difficult.
There are 2 ways to cope with this problem then one way to make sure that later on it won’t be a concern. First let’s look at choosing the lid for the septic tank should you don’t know where it is actually. You can either dig for it yourself or possess the septic pumping service practice it. Performing it on your own can be time intensive and not a lot of fun. Getting the pumping service do it can be costly.
Generally it is actually completed in this fashion. You or someone you hire must dig down until they find the top in the septic tank. That is often the easy portion of the process. Once you discover the top of the tank afterwards you must discover the lid. This can involve digging concentric circles outward from the initial hole until you discover the lid. Once you discover the lid this is the time to repair the problem; use a riser.
A septic tank riser is essentially a large tube that extends through the lid in the tank as much as the surface of the ground. Once installed it can provide quick access to the septic tank that’s readily available any time there is a problem or it needs to be pumped out.
You will find three basic types of risers to choose from; concrete, PVC, and polyethylene.
While concrete risers are generally cheaper it isn’t the best option. A concrete riser is heavy and may need heavy equipment to lift and install it. It is additionally more apt to leak then your many other materials and may have rust problems if rebar is used to strengthen the cement.
PVC and polyethylene risers are lightweight and simple to install. These are resistant to corrosion and naturally is not going to rust. In addition they add a gasket seal to help keep water from entering and stop sewer gases from escaping coming from a leaky lid. The increased expense of these two kinds of risers is well worth it. They may be virtually easy to maintain and will easily last for the life of the whole septic system.
Every septic tank needs a riser and then in a multitude of locations they are now a code requirement. Should you don’t have one it might be worth having one installed before something goes completely wrong together with your septic system. Quick accessibility tank is one of bawvgx first steps to diagnosing any problems.
A suitably designed septic system will keep maintenance issues and problems to a minimum. In case you are thinking of installing or replacing a septic system a local septic tank pumping service can point you inside the right direction. To learn more about septic tank pumping and design please click here.